Get 100/- OFF on your first order. | Free Shipping on all orders.

Sennheiser MKE-400 Compact Shotgun Microphone

Rs. 14,999.00 Rs. 18,990.00
Tax included Free Shipping

Free Delivery -

Specification

  • Microphone
    Form Factor : Camera-Mount / Shotgun Mic
    Sound Field : Mono
    Operating Principle : Pressure Gradient
    Capsule : 1 x Electret Condenser
    Polar Pattern : Supercardioid
    Orientation : End Address
    Circuitry : Solid-State
    Pad :  None
    High-Pass Filter : 200 Hz
    Tone Adjustment : None
    Gain Adjustment : -20 to +20 dB
    Indicators : 1 x Green Single LED (Power)
    On-Board Controls : Gain/Sensitivity, Headphone Volume, High-Pass Filter
    Windscreen : Built-In
    Windsock/Windjammer (Included)
  • Performance
    Frequency Range : 50 Hz to 20 kHz
    Maximum SPL : 132 dB SPL (1 kHz)
    Sensitivity : -23 dBV/Pa at 1 kHz (Max Gain)
    -63 dBV/Pa at 1 kHz (Min Gain)
    THD : < 1%
  • Connectivity
    Output Connectors (Analog) : 1 x 1/8" / 3.5 mm TRS Female (Locking, on Mic)
    1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable)
    1 x 1/8" / 3.5 mm TRRS Male (on Detachable Cable)
    Headphone Connector : 1 x 1/8" / 3.5 mm
  • Power
    Bus Power : None
    Operating Voltage : 2 to 10 V (Plug-In Power)
    Battery Type : 2 x AAA (Not Included)
    Approximate Battery : Life 100 Hours
  • Physical
    Color : Black
    Mounting : Camera/Shoe-Mount (via Integrated Hardware)
    Included Case : Pouch
    Included Filters : None
    Dimensions : H: 2.6 x W: 1.5 x L: 5" / H: 67 x W: 37 x L: 126 mm
    Weight : 3.3 oz / 93.5 g

Box Content

  • Sennheiser MKE 400 II Shotgun Microphone
  • CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable
  • CL 35 TRRS Locking 3.5mm TRS to 3.5mm TRRS Coiled Cable
  •  Furry Windshield
  • Drawstring Pouch

Delivery and Shipping

All products dispatches within 24-48 hr depending on the shipping partners. T&C apply.

Description

The MKE 400 II is a compact, highly directional on-camera shotgun microphone designed to isolate and enhance the audio for your video. Like the MKE 200, the MKE 400 II includes built-in wind protection and integrated shock absorption, while offering even more features to ensure the best possible recordings.

A three-step sensitivity switch enables the MKE 400 II the ability to provide distortion free sound in any environment, and a switchable low-cut filter focuses your audio on the most essential frequencies for clarity and speech intelligibility. Interchangeable, 3.5 mm locking coiled cables offer compatibility with DSLR/M cameras or mobile devices and a convenient headphone output allows you to monitor your levels while recording.

Focus your sound
The MKE 400 II features a super-cardioid polar pattern achieved by an acoustic interference tube, providing focus and detail while rejecting unwanted background noise. Ideal for vloggers and videographers alike, this highly directional microphone will enhance your audio and bring presence and clarity to your recordings.

Record with confidence
All handheld cameras are susceptible to handling noise, so the MKE 400 II features integrated wind protection and shock absorption. This combination ensures the cleanest audio recordings possible while shooting video on the move. Attach the included furry windshield for maximum wind protection in outdoor environments.

Versatile by design
In today’s world, your video recording is most likely not confined to one device, and your microphone doesn’t have to be either. Each MKE 400 II includes 3.5 mm TRS and TRRS locking cables to be used with DSLR/M cameras or mobile devices.

Adapt to the situation
Let’s face it, poor acoustic environments are practically unavoidable when traveling or shooting on location. That’s why the MKE 400 II comes equipped with both a low-cut filter and a 3-step gain sensitivity switch. Use the low-cut filter to remove problematic low frequency rumble or wind noise and adjust your gain sensitivity to optimize recording levels in any environment.

Before you start rolling
One of the most important steps when recording audio is to check your levels and monitor your sound. While some cameras have a headphone jack, not all do, and that’s where the headphone monitoring output comes into play. Plug any 3.5 mm headphone directly into the MKE 400 II and use the integrated volume control to dial in your recordings.

SENNHEISER

Sennheiser MKE-400 Compact Shotgun Microphone

Rs. 14,999.00 Rs. 18,990.00

The MKE 400 II is a compact, highly directional on-camera shotgun microphone designed to isolate and enhance the audio for your video. Like the MKE 200, the MKE 400 II includes built-in wind protection and integrated shock absorption, while offering even more features to ensure the best possible recordings.

A three-step sensitivity switch enables the MKE 400 II the ability to provide distortion free sound in any environment, and a switchable low-cut filter focuses your audio on the most essential frequencies for clarity and speech intelligibility. Interchangeable, 3.5 mm locking coiled cables offer compatibility with DSLR/M cameras or mobile devices and a convenient headphone output allows you to monitor your levels while recording.

Focus your sound
The MKE 400 II features a super-cardioid polar pattern achieved by an acoustic interference tube, providing focus and detail while rejecting unwanted background noise. Ideal for vloggers and videographers alike, this highly directional microphone will enhance your audio and bring presence and clarity to your recordings.

Record with confidence
All handheld cameras are susceptible to handling noise, so the MKE 400 II features integrated wind protection and shock absorption. This combination ensures the cleanest audio recordings possible while shooting video on the move. Attach the included furry windshield for maximum wind protection in outdoor environments.

Versatile by design
In today’s world, your video recording is most likely not confined to one device, and your microphone doesn’t have to be either. Each MKE 400 II includes 3.5 mm TRS and TRRS locking cables to be used with DSLR/M cameras or mobile devices.

Adapt to the situation
Let’s face it, poor acoustic environments are practically unavoidable when traveling or shooting on location. That’s why the MKE 400 II comes equipped with both a low-cut filter and a 3-step gain sensitivity switch. Use the low-cut filter to remove problematic low frequency rumble or wind noise and adjust your gain sensitivity to optimize recording levels in any environment.

Before you start rolling
One of the most important steps when recording audio is to check your levels and monitor your sound. While some cameras have a headphone jack, not all do, and that’s where the headphone monitoring output comes into play. Plug any 3.5 mm headphone directly into the MKE 400 II and use the integrated volume control to dial in your recordings.

View product